Konica Minolta BIZHUB C20 User Manual page 49

KEY
SPEED
LANGUAGE
LAMP OFF TIME
LAMP WARMUP TIME
Configuration Menu Overview
Setting
TIME TO
START
Specify the length of time until the cursor begins
to move continuously when a key is held down.
Setting
INTERVAL
Specify the length of time until the cursor contin-
uously moves between settings or characters.
Setting
Select the language of the menus and mes-
sages that appear in the message window.
Setting
Select the length of time until the scanner unit
lamp goes off when no operation is performed.
If
MODE1
the machine enters Preheat mode.
If
MODE2
the machine enters Energy Save mode.
Setting
Specify the warm-up time for the lamp of the
scanner unit.
If
AUTO
recover from Energy Save mode when the
machine is turned on is adjusted according to
the room temperature. Since the machine can-
not be used until its condition is completely sta-
bilized, select this setting, for example, if you
wish to scan at a high image quality from the
first page.
If
FIX
after lamp warm-up is finished. With a low room
temperature, the quality of the first page of a
copy or scanned image may not be as good as
if
AUTO
/
0.1sec 0.3sec
/
1.0sec 1.5sec
/
2.5sec 3.0sec
/
0.1sec 0.3sec
/
1.0sec 1.5sec
/
2.5sec 3.0sec
/
ENGLISH
/
ITALIAN
/
GUESE RUSSIAN
/
SLOVAK HUNGARIAN
/
MODE1 MODE2
is selected, the lamp goes off when
is selected, the lamp goes off when
/
AUTO FIX
is selected, the length of time to
is selected, the machine can be used
was selected.
/
0.5sec
/
2.0sec
/
0.5sec
/
2.0sec
/
FRENCH GERMAN
/
SPANISH PORTU-
/
CZECH
/
POLISH
/
/
/
/
/
/
35