Advantech MIO-5250 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. MIO-5250
  6. User manual

Advantech MIO-5250 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
MIO-5250

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIO-5250 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech MIO-5250

Summary of Contents for Advantech MIO-5250

  • Page 1 User Manual MIO-5250...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.

  • Page 3: Declaration Of Conformity

    Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 4 Technical Support and Assistance Visit the Advantech web site at www.advantech.com where you can find the lat- est information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...

  • Page 5: Packing List

    Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately.  1 x MIO-5250 SBC  1 x SATA Cable 32cm (P/N 1700008941) ...

  • Page 6: Optional Accessories

    MI/O extension evaluation board w/ PCIe switch *MIOe-230 compatibility is optional by request (need BOM update). Optional Accessories Part number Description 1960054269T001 Heat spreader 137x84.2x16.7-mm MIO-5250 1703100260 Internal USB 5/6 cable 1935032000 Screw of Heatsink / Cooler R/S 5.5 2.0 +M M3*20L ST Ni 1930000058...
  • Page 7 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
  • Page 8 MIO-5250 User Manual viii...

  • Page 9: Table Of Contents

    System date / System time ............17 Advanced BIOS Features Setup ............. 18 Figure 3.3 Advanced BIOS features setup screen ....18 3.4.1 Advantech BIOS Update V1.3 ............ 18 3.4.2 ACPI Settings................19 Figure 3.4 ACPI Setting ............. 19 3.4.3 TPM Configuration ..............
  • Page 10 1st MB memory map................59 Table B.3: 1st MB memory map ..........59 Interrupt assignments ................59 Table B.4: Interrupt assignments..........59 Appendix C Watchdog Timer Sample Code ..61 EC Watchdog Timer sample code ............62 MIO-5250 User Manual...

  • Page 11: Chapter 1 General Information

    Chapter General Information...

  • Page 12: Introduction

    6 x USB 2.0 ports  1 x SATAII (Max data transfer rate 300 MB/s)  4 x COM (2 x RS-232, 2 x RS-232/422/485)  Multi level Watchdog timer (set by Advantech iManager)  2 x GbE  MIOe connector Product Specifications...

  • Page 13: Chipset

    N2600: 24-bit LVDS1, resolution up to1366 x 768 D2700: 24-bit LVDS1, resolution up to 1440 x 900, Display 48-bit LVDS2  HDMI: Supports 1920 x 1200p @60Hz, 36bpp Supports HDMI 1.3, Max data rate up to 1.65Gb/s Dual independent display VGA+LVDS, VGA+HDMI, HDMI+LVDS MIO-5250 User Manual...
  • Page 14 Sequence control Supported SMBus Supported GPIO 8-bit GPIO Multi Level WDT (set by Advantech iManager) Watchdog timer Programmable 1-255 sec / min Hardware monitor CPU Temperature / input Current / input Voltage Power saving Deep sleep S5 mode / Smart Fan / Back light control 1.

  • Page 15: Mechanical Specifications

    Win. HCT12 S3 mode S5 mode Condition Mode Mode (10minutes) MIO-5250N-S6A1E +12V 0.606 0.524 0.729 0.049 0.041 MIO-5250D-U1A1E +12V 0.891 0.751 1.056 0.049 0.041 1.3.3.3 RTC Battery  Typical Voltage: 3.0 V  Normal discharge capacity: 210 mAh MIO-5250 User Manual...

  • Page 16: Environmental Specifications

    Standard products (0~60°C)  Storage temperature: -40~85°C 1.3.4.4 Storage Relative Temperature Standard products (0~60°C)  Relative humidity: 95% @ 60°C Phoenix products (-20~80°C)  Relative humidity: 95% @ 60°C Platinum Phoenix products (-40~85°C)  Relative humidity: 95% @ 60°C MIO-5250 User Manual...

  • Page 17: Chapter 2 Hardware Installation

    Chapter Hardware Installation...

  • Page 18: Jumpers

    This chapter explains the setup procedures of the MIO-5250 A1 hardware, including instructions on setting jumpers and connecting peripherals, switches, indicators and mechanical drawings. Be sure to read all safety precautions before you begin the installation procedure. Jumpers 2.1.1 Jumper List Table 2.1: Jumpers...
  • Page 19 PIN HEADER 2*1P 180D(M)SQUARE 2.0mm DIP W/O Pb Setting Function Power Button for Power On (1-2)* Auto Power On COM2 Setting Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050 Setting Function (1-2)* RS232 (3-4) RS485 (5-6) RS422 MIO-5250 User Manual...

  • Page 20: Jumper Description

    To open a jumper, you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and 3. The jumper settings are schematically depicted in this manual as follows. MIO-5250 User Manual...

  • Page 21: Connectors

    RS422/485 2 CN24 COM3/COM4 RS-232 CN25 SMBus CN26 System FAN CN28 CN30 Audio CN31 MIOe CN33 24 bits LVDS1 Panel CN34 48 bits LVDS2 Inverter Power CN35 48 bits LVDS2 Panel CN36 HDMI CN38 LVDS1 Inverter Power MIO-5250 User Manual...

  • Page 22: Mechanical

    Mechanical 2.3.1 Jumper and Connector Location Figure 2.1 Jumper and Connector Layout (Component Side) Figure 2.2 Jumper and Connector Layout (Solder Side) MIO-5250 User Manual...

  • Page 23: Board Dimensions

    2.3.2 Board Dimensions Figure 2.3 Board Dimensions (Component Side) Figure 2.4 Board Dimensions (Solder Side) MIO-5250 User Manual...

  • Page 24: Figure 2.5 I/O Connectors Mechanical Drawing

    Figure 2.5 I/O Connectors Mechanical Drawing MIO-5250 User Manual...

  • Page 25: Chapter 3 Bios Settings

    Chapter BIOS Settings...

  • Page 26: Bios Setup

    AMIBIOS has been integrated into many motherboards for over a decade. With the AMIBIOS setup program, you can modify BIOS settings and control the various sys- tem features. This chapter describes the basic navigation of the MIO-5250 BIOS setup screens.

  • Page 27: Main Setup

    Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. MIO-5250 User Manual...

  • Page 28: Advanced Bios Features Setup

    Advanced BIOS Features Setup Select the Advanced tab from the MIO-5250 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...

  • Page 29: Acpi Settings

    This item allows users to set the ACPI sleep state.  Lock Legacy Resources This item allows users to lock legacy devices' resources.  S3 Video Report This item allows users to enable or disable S3 resume for VBIOS. MIO-5250 User Manual...

  • Page 30: Tpm Configuration

    3.4.3 TPM Configuration Figure 3.5 TPM Configuration  TPM Support Disable/Enable TPM if available. 3.4.4 CPU Configuration Figure 3.6 CPU Configuration MIO-5250 User Manual...

  • Page 31: Sata Configuration

    This item allows users to enable or disable limit CPUID maximum for Windows 3.4.5 SATA Configuration Figure 3.7 SATA Configuration  SATA Controller(s) This item allows users to enable or disable the SATA controller(s).  SATA Mode Selection This item allows users to select mode of SATA controller(s). MIO-5250 User Manual...

  • Page 32: Intel Fast Flash Standby

    3.4.6 Intel Fast Flash Standby Figure 3.8 Intel Fast Flash Standby  IFFS Support This item allows users to enable or disable iFFS. 3.4.7 USB Configuration Figure 3.9 USB Configuration MIO-5250 User Manual...

  • Page 33: Embedded Controller Configuration

    This item allows users to enable or disable smart FAN feature.  Backlight Enable Polarity This item allows users to set backlight enable polarity.  EC Watch Dog Function This item allows users to enable or disabled EC watchdog function. MIO-5250 User Manual...

  • Page 34: Super I/O Configuration

    This item allows users to configure serial port 1.  Serial Port 2 Configuration This item allows users to configure serial port 2.  Serial Port 3 Configuration This item allows users to configure serial port 3. MIO-5250 User Manual...

  • Page 35: Aoac Configuration

    3.4.10 AOAC Configuration Figure 3.12 AOAC Configuration  AOAC Configuration This item allows users to enable or disabled AOAC function. 3.4.11 PPM Configuration Figure 3.13 PPM Configuration MIO-5250 User Manual...

  • Page 36: Chipset Configuration

    This item allows users to enable or disabled Intel C-state POPUP function. Chipset Configuration Select the Chipset tab from the MIO-5250 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlighting it using the <Arrow>...

  • Page 37: Host Bridge/Intel Igd Configuration

    ALS Support This item allows users to select ASL support for ACPI.  Backlight Control Support This item allows users to select backlight control support.  This item allows users to select BIA with selected aggressiveness level. MIO-5250 User Manual...

  • Page 38: South Bridge

    3.5.2 South Bridge Figure 3.16 South Bridge Figure 3.17 TPT Device  Azalia Controller Enables or disables the azalia controller. MIO-5250 User Manual...

  • Page 39: Boot Settings

     High Precision Timer Enables or disables the high precision timer.  SLP_S4 Assertion Width This item allows users to set a delay of sorts.  Restore AC Power Loss Boot Settings Figure 3.18 Boot Setup Utility MIO-5250 User Manual...

  • Page 40: Security Setup

    Security Setup Figure 3.19 Password Configuration Select Security Setup from the MIO-5250 Setup main BIOS setup menu. All Security Setup options, such as password protection is described in this section. To access the sub menu for the following items, select the item and press <Enter>: ...

  • Page 41: Save & Exit

    Select this option to quit Setup without making any permanent changes to the system configuration and reboot the computer. 3.8.5 Save Changes When users have completed system configuration, select this option to save changes without exiting the BIOS setup menu. MIO-5250 User Manual...

  • Page 42: Discard Changes

    3.8.7 Restore Defaults The MIO-5250 automatically configures all setup items to optimal settings when users select this option. Optimal Defaults are designed for maximum system perfor- mance, but may not work best for all computer applications. In particular, do not use the Optimal Defaults if the user's computer is experiencing system configuration problems.

  • Page 43: Mioe Installation

    Chapter MIOe Installation...
  • Page 44 Four long screws are for the heatsink; two shorter screws are for the main board. There are six standoff’s on the MIOe module which can also can be installed with the screws and copper studs. MIO-5250 User Manual...

  • Page 45: Appendix A Pin Assignments

    Appendix Pin Assignments...
  • Page 46 DC POWER JACK 2.5mm 90D(M) DIP 2DC-G213B200 Pin Name +VIN SODIMMDDR3RVS_204 Part Number 1651001648 Footprint DDR3_204P_2-2013311-1 Description DDR3 SODIMM H=9.2mm 204P SMD 2-2013311-1 Pin Name Power Switch Part Number 1655302020 Footprint WF_2P_79_BOX_R1_D Description WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P Pin Name PSIN MIO-5250 User Manual...
  • Page 47 Footprint WF_2P_79_BOX_R1_D Description WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P Pin Name RESET# GPIO Part Number 1653004099 Footprint HD_5x2P_79_23N685B-10M10 Description BOX HEADER 5x2P 2.00mm 180D(M) SMD 23N685B-10M10 Pin Name GPIO4 GPIO0 GPIO5 GPIO1 GPIO6 GPIO2 GPIO7 GPIO3 MIO-5250 User Manual...
  • Page 48 1654000055 Footprint DBVGA-VF5MS Description D-SUB Conn. 15P 90D(F) DIP 070242FR015S200ZU Pin Name GREEN BLUE DDAT HSYNC VSYNC DCLK CN11 CFast Part Number 1653004849 Footprint CFAST_24P_N7G24 Description CFast 24P 1.27mm 90D(M) SMD N7G24-A0B2RA-10-0HT- Pin Name PC10 PC11 PC12 MIO-5250 User Manual...
  • Page 49 PC13 +3.3V PC14 +3.3V PC15 PC16 PC17 CN12 Part Number 1654000639 Footprint SIM-WL608C Description SIM card conn 6p 90D(F)SMD WO/Pb WL608C3-M04-7F Pin Name UIM_PWR UIM_RESET UIM_CLK UIM_VPP UIM_DATA MIO-5250 User Manual...
  • Page 50 CN13 Mini PCIE Part Number 1654006715 Footprint MINIPCI_52P_88911-5204M Description Pin Name WAKE# +3.3VSB +1.5V REFCLK- REFCLK+ PERST# PERn0 +3.3VSB PERp0 +1.5V SMB_CLK PETn0 SMB_DAT PETp0 USB D- USB D+ +3.3VSB +3.3VSB MIO-5250 User Manual...
  • Page 51 +1.5V +3.3VSB MIO-5250 User Manual...
  • Page 52 CN14 SATA Part Number 1654004118 Footprint SATA_7P_50_WATA-07DPLH4U Description Serial ATA 7P 1.27mm 90D(M) SMD WATA-07DPLH4U Pin Name CN15 SATA Power Part Number 1655001154 Footprint WF_4P_98_BOX_R1_D Description WAFER BOX 4P 2.50mm 180D(M) DIP 24W1170-04S10-01 Pin Name +12V MIO-5250 User Manual...
  • Page 53 USB_8P_UB1112C-8FDE-4F Description USB CONN. 8P 2.0mm 90D DIP UB1112C-8FDE-4F Pin Name CN17 Internal USB Part Number 1653005260 Footprint HD_5x2P_79_N10 Description PIN HEADER 2x5P 2.0mm 180D(M) SMD 21N22050 Pin Name A_D- B_D- A_D+ B_D+ Matching Cable: 1703100260 1703100121 MIO-5250 User Manual...
  • Page 54 USB CONN. 8P 2.0mm 90D DIP UB1112C-8FDE-4F Pin Name CN19 COM1/COM2 RS-232 Part Number 1653004793 Footprint HD_10x2P_79_23N685B-20M10 Description BOX HEADER 10x2P 2.0mm 180D(M)SMD 23N685B-20M10B Pin Name DCD1# DSR1# RXD1 RTS1# TXD1 CTS1# DTR1# RI1# DCD2# DSR2# RXD2 RTS2# TXD2 CTS2# DTR2# RI2# MIO-5250 User Manual...
  • Page 55 Matching Cable: 1701200220 CN20 RS422/485 1 Part Number 1655304032 Footprint WF_5P_49_BOX_85205 Description WAFER 5P 1.25mm 180D(M) SMD 85205-05701 Pin Name 422RX- 422RX+ 422/485TX+ 422/485TX- MIO-5250 User Manual...
  • Page 56 422RX- 422RX+ 422/485TX+ 422/485TX- CN24 COM3/COM4 RS-232 Part Number 1653004793 Footprint HD_10x2P_79_23N685B-20M10 Description BOX HEADER 10x2P 2.0mm 180D(M)SMD 23N685B-20M10B Pin Name DCD3# DSR3# RXD3 RTS3# TXD3 CTS3# DTR3# RI3# DCD4# DSR4# RXD4 RTS4# TXD4 CTS4# DTR4# RI4# MIO-5250 User Manual...
  • Page 57 SMBus Part Number 1655904020 Footprint FPC4V-125M Description WAFER 4P 1.25mm 180D(M) SMD 85205-04001 Pin Name SMB_DAT SMB_CLK CN26 System FAN Part Number 1655003010 Footprint WHP3VA Description Wafer 2.54mm 3P 180D(M) DIP W/LOCK 22-27-2031 Pin Name +12V Speed MIO-5250 User Manual...
  • Page 58 TX+(10/100), BI_DA+(GHz) TX-(10/100), BI_DA-(GHz) RX+(10/100), BI_DB+(GHz) BI_DC+(GHz) BI_DC-(GHz) RX-(10/100), BI_DB-(GHz) BI_DD+(GHz) BI_DD-(GHz) CN30 Audio Part Number 1653004099 Footprint HD_5x2P_79_23N685B-10M10 Description BOX HEADER 5x2P 2.00mm 180D(M) SMD 23N685B-10M10 Pin Name LOUTR LINR LOUTL LINL MIC1R MIC1L Matching Cable: 1703100152 MIO-5250 User Manual...
  • Page 59 CN31 MIOe Part Number 1654006235 Footprint BB_40x2P_32_1625x285_2HOLD Description Pin Name PCIE_RX0+ PCIE_TX0+ PCIE_RX0- PCIE_TX0- PCIE_RX1+ PCIE_TX1+ PCIE_RX1- PCIE_TX1- PCIE_RX2+ PCIE_TX2+ PCIE_RX2- PCIE_TX2- PCIE_RX3+ PCIE_TX3+ PCIE_RX3- PCIE_TX3- PCIE_CLK+ LOUTL PCIE_CLK- LOUTR AGND SMB_CLK SMB_DAT PCIE_WAKE# RESET# SLP_S3# MIO-5250 User Manual...
  • Page 60 CLK33M SLP_S5# LPC_AD0 DDP_HPD LPC_AD1 LPC_AD2 DDP_AUX+ LPC_AD3 DDP_AUX- LPC_DRQ#0 LPC_SERIRQ DDP_D0+ LPC_FRAME# DDP_D0- USB0_D+ DDP_D1+ USB0_D- DDP_D1- USB1_D+/USB_SSTX+ DDP_D2+ USB1_D-/USB_SSTX- DDP_D2- USB2_D+/USB_SSRX+ DDP_D3+ USB2_D-/USB_SSRX- DDP_D3- USB_OC# +12VSB +5VSB +5VSB +5VSB +5VSB MIO-5250 User Manual...
  • Page 61 CN33 24 bits LVDS1 Panel Part Number 1653910261 Footprint SPH10X2 Description B/B Conn 10x2P 1.25mm 180D(M)SMD DF13-20DP-1.25V Pin Name LVDS0_D0+ LVDS0_D0- LVDS0_D1+ LVDS0_D1- LVDS0_D2+ MIO-5250 User Manual...
  • Page 62 LVDS0_D2- LVDS0_CLK+ LVDS0_D3+ LVDS0_CLK- LVDS0_D3- +5V or +3.3V +5V or +3.3V CN34 48 bits LVDS2 Inverter Power Part Number 1655000453 Footprint WHL5V-2M-24W1140 Description WAFER BOX 2.0mm 5P 180D(M) DIP WO/Pb JIH VEI Pin Name +12V ENABKL MIO-5250 User Manual...
  • Page 63 B/B Conn. 40P 1.25mm 90D SMD DF13-40DP-1.25V(91) Pin Name +5V or +3.3V +5V or +3.3V +5V or +3.3V +5V or +3.3V LVDS0_D0- LVDS1_D0- LVDS0_D0+ LVDS1_D0+ LVDS0_D1- LVDS1_D1- LVDS0_D1+ LVDS1_D1+ LVDS0_D2- LVDS1_D2- LVDS0_D2+ LVDS1_D2+ LVDS0_CLK- LVDS1_CLK- LVDS0_CLK+ LVDS1_CLK+ LVDS0_D3- LVDS1_D3- LVDS0_D3+ LVDS1_D3+ MIO-5250 User Manual...
  • Page 64 TMDS Data2+ TMDS Data2 Shield TMDS Data2®C TMDS Data1+ TMDS Data1 Shield TMDS Data1®C TMDS Data0+ TMDS Data0 Shield TMDS Data0®C TMDS Clock+ TMDS Clock Shield TMDS Clock®C Reserved Reserved DDC Ground +5V Power Hot Plug Detect MIO-5250 User Manual...
  • Page 65 CN37 Part Number 1653910261 Footprint SPH10X2 Description B/B Conn 10x2P 1.25mm 180D(M)SMD DF13-20DP-1.25V Pin Name SDAT SCLK Hot Plug Detect +5V or +3.3V +5V or +3.3V MIO-5250 User Manual...
  • Page 66 CN38 24 bits LVDS1 Inverter Power Part Number 1655000453 Footprint WHL5V-2M-24W1140 Description WAFER BOX 2.0mm 5P 180D(M) DIP WO/Pb JIH VEI Pin Name +12V ENABKL MIO-5250 User Manual...

  • Page 67: Appendix B System Assignment

    Appendix System Assignments...

  • Page 68: System I/O Ports

    Communications Port (COM3) 3F8-3FF Communications Port (COM1) 0400 - 04FF Motherboard resources 0500 - 053F Motherboard resources DMA Channel assignments Table B.2: DMA Channel assignments Channel Function Available Available Available Available Direct memory access controller Available Available Available MIO-5250 User Manual...

  • Page 69: 1St Mb Memory Map

    EC Watch DOG IRQ6 Available IRQ7 Communications Port (COM3) IRQ8 System CMOS/real time clock IRQ9 Microsoft ACPI-Compliant System IRQ10 Available IRQ11 Communications Port (COM4) IRQ12 PS/2 Compatible Mouse IRQ13 Numeric data processor IRQ14 Primary IDE IRQ15 Secondary IDE MIO-5250 User Manual...
  • Page 70 MIO-5250 User Manual...

  • Page 71: Appendix C Watchdog Timer Sample Code

    Appendix Watchdog Timer Sample Code...

  • Page 72: Ec Watchdog Timer Sample Code

    EC_Command_Port mov al, 57h ; Watch dog event flag. out dx,al mov dx, EC_Data_Port mov al, 04h ; Reset event. out dx,al mov dx, EC_Command_Port mov al,28h ; start WDT function. out dx,al .exit MIO-5250 User Manual...
  • Page 73 MIO-5250 User Manual...
  • Page 74 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2012...

Table of Contents