2.2
Motherboard Overview
Before you install the motherboard, study the configuration of your chassis to ensure
that the motherboard fits into it. Refer to the chassis documentation before installing
the motherboard.
Warning! Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and dam-
age motherboard components.
2.2.1
Placement Direction
When installing the motherboard, make sure that you place it into the chassis in the
correct orientation. The edge with external ports goes to the rear part of the chassis
as indicated in the image below.
2.2.2
Screw Holes
Place eight (8) screws into the holes indicated by circles to secure the motherboard
to the chassis.
Caution! Do not over tighten the screws! Doing so can damage the motherboard.
Place this side towards the rear
of the chassis.
7
SIMB-U01 User Manual