4-2 Playback
4-2 Playback
This section describes playback from the VTR and
hard disk built into the unit.
4-2-1 Preparations for Playback
Switch settings
Before beginning playback, make any necessary
switch settings.
AUDIO INPUT/MONITOR SELECT buttons (Before
Version 2.00)
AUDIO INPUT/MIXING/MONITOR SELECT buttons
(Version 2.00 or later) (see page 2-4): select the audio
channel(s) to be monitored
POWER switch: ON
PB controls (see page 2-5):
adjust the audio playback
levels
PB button (see page 2-9): lit
CTL/TC/UB button (see page 2-9 ):
select the time data to be displayed
4-6
Chapter 4 Recording and Playback
For details of the settings of each of the switches, refer to
the pages indicated in parenthesis.
TC switch (see page 2-6):
select the time code to be
displayed
REMOTE/LOCAL switch (see page 2-7):
9P indicator off
PRESET/REGEN switch (see page 2-6):
select the output time code
INT/EXT switch (see page 2-6): INT
Device specification buttons (see page 2-12):
selecting the device on which operations are
to be carried out (see page 4-2)