Sony DNW-A100 Operation Manual page 120

7-4 Disk File Management Menu
For information about how to switch the editing
accuracy from FRAME to GOP when this message
appears, see the following item, "When an already
recorded program or files are present."
4
Press the SET button to switch the editing
accuracy.
The indication in the time data display changes as
follows.
5
Press the MENU button a number of times, to exit
from the disk file management menu.
The indication in the time data display returns to
the state before executing step 1.
When an already recorded program or files
are present
When it is not possible to switch the editing accuracy
from FRAME to GOP because already recorded
program or files are present, in step 3 of the procedure
above, the message "F3-CANNOT SEL" appears in
the time data display. In this case, to switch the
editing accuracy, carry out either of the following
procedures.
• Using the procedure in the next item, "Deleting the
program from the hard disk (DISK PROGRAM)
(F4)", delete the program, then carry out the
procedure above.
This preserves the existing files.
• Using the procedure in the item, "Deleting the
program and all files from the hard disk (DISK
PROGRAM and DISK MASTER) (F5)" (page 7-31),
delete all existing files, then carry out the procedure
above.
7-30
Chapter 7 Menu System
Deleting the program from the hard disk
(DISK PROGRAM) (F4)
Use the following procedure to delete all of the
program from the hard disk (DISK PROGRAM).
(Files in DISK MASTER are not deleted.)
1
Display the disk file management menu, select
item F4, then press the SET button.
The displays shown below appear in the time data
display and on a monitor connected to the
COMPOSITE VIDEO OUTPUT 3 (SUPER)
connector.
Time data display
Monitor
DISK FILE MANAGEMENT
F4:DELETE PROGRAM
*OFF
2
Holding down the JOG button, turn the search dial
so that the indication in the time data display
changes from "OFF" to "ON".
Displayed while the JOG button is held down.
3
Release the JOG button to confirm the setting.
The indication in the time data display changes as
follows.