Step 2: Capture Still Images; Step 3: Quick Playback - Sony HVO-4000MT Instructions For Use Manual

Step 2: Capture Still
Images
Capture still images from live image transmissions.
Up to 500 still images can be captured for a single
recorded data entry.
Press the CAPTURE button.
When you capture an image, the capture number appears.
Patient ID
The still image data is saved.
For details on capturing still images, see "Capture Still
Images" (page 47).
Recorded data entries are created when still images are
captured.
If the surgical procedure or examination is finished and
you want to end the recording session, proceed to "Step
4: End Recording" (page 42) and perform the recording
end operation.
CAPTURE button
Capture counter

Step 3: Quick Playback

Play back data recorded in Step 1.
Press the B PLAY button.
The most recent recorded data plays back.
"PLAY" and the number of the chapter being played back
appear while playback is in progress.
Patient ID
You can also perform the following operations during
playback.
Fast forward playback
Press the M FF button.
Rewind playback
Press the m REW button.
Pause playback
Press the X PAUSE button.
To resume playback, press the X PAUSE button again or
press the B PLAY button.
Stop playback
Press the x STOP button.
41
B PLAY button
Chapter number