Sony DNW-A100 Operation Manual page 93

Item number Item name
013 525/625 SYSTEM
SELECT
Before using this menu
item, consult the person
responsible for the
installation.
B01 RECALL BANK 1
B02 RECALL BANK 2
B03 RECALL BANK 3
B04 RECALL BANK 4
B11 SAVE BANK 1
B12 SAVE BANK 2
B13 SAVE BANK 3
B14 SAVE BANK 4
B20 RESET SETUP
Settings
Specify whether to enable switching between the 525 (NTSC) and 625 (PAL)
systems.
OFF: Do not enable system switching.
ON: Enable system switching.
Setting this item to ON and switching the system enables the unit to operate in
the system switched to.
The basic and extended menu settings are saved separately for 525 (NTSC)
mode and 625 (PAL) mode.
Limitations when using the DNW-A100/A50/A45 in 625 mode
• Betacam and Betacam SP tape cannot be played back.
• Composite input cannot be recorded.
• When NTSC signals are recorded on the hard disk, the hard disk cannot be
used for recording or playback. In this case, HD525 is displayed in the time data
display area. In order to use the hard disk again, use the disk file management
menu (see page 7-25) to delete all files.
• Color frame synchronization with external reference video signals cannot be
performed.
Limitations when using the DNW-A100P/A50P/A45P in 525 mode
• Betacam and Betacam SP tape cannot be played back.
• Composite input cannot be recorded.
• When PAL signals are recorded on the hard disk, the hard disk cannot be used
for recording or playback. In this case, HD625 is displayed in the time data
display area. In order to use the hard disk again, use the disk file management
menu (see page 7-25) to delete all files.
• Color frame synchronization with external reference video signals cannot be
performed.
Set to ON to recall menu settings from menu bank 1.
Set to ON to recall menu settings from menu bank 2.
Set to ON to recall menu settings from menu bank 3.
Set to ON to recall menu settings from menu bank 4.
Set to ON to save current menu settings to menu bank 1.
Set to ON to save current menu settings to menu bank 2.
Set to ON to save current menu settings to menu bank 3.
Set to ON to save current menu settings to menu bank 4.
Set to ON to reset current active settings to factory default values.
7-3
Chapter 7 Menu System