Shuttle Button - Sony DNW-A100 Operation Manual

2-1 Control Panels
6 Search control section

1 SHUTTLE button

2 JOG button
SHUTTLE JOG
REVERSE
4 Search dial
1 SHUTTLE button
To use the search dial for playback in shuttle mode,
press this button, turning it on.
For details of playback in shuttle mode, see the item for the
search dial 4.
2 JOG button
To use the search dial for playback in jog mode, press
this button, turning it on.
For details of playback in jog mode, see the item for the
search dial 4.
3 VAR (variable) button
To use the search dial for playback in variable speed
mode, press this button, turning it on.
For details of playback in variable mode, see the item for
the search dial 4.
4 Search dial
Turn this to carry out playback in the modes shown in
the following table. Turn the dial clockwise for
forward playback and counterclockwise for reverse
playback.
Pressing the dial toggles between shuttle and jog
modes or between variable and jog modes.
2-18
Chapter 2 Location and Function of Parts
3 VAR button
VAR
FORWARD
You can carry out noiseless playback over the whole
playback speed range from the hard disk, and in the
range of ±1 times normal speed from a Betacam SX
format tape.
Playback modes using the search dial
Playback mode Operations and functions
Shuttle Press the SHUTTLE button or the search
dial so that the SHUTTLE button lights,
then turn the search dial. Playback is
carried out at a speed determined by the
position of the search dial. The playback
speed range is as follows:
• Using a Betacam SX tape: –50 to +50
times normal speed
• Using an analog Betacam tape: –35 to
+35 times normal speed for DNW-A100/
A50/A45 or –42 to +42 times normal
speed for DNW-A100P/A50P/A45P
• Using the hard disk: –100 to +100 times
normal speed
The search dial has detents at the still
position and at ±10 times normal speed.
The maximum shuttle mode playback
speed can be changed by changing the
setting of item 102 in the extended menu
(see page 7-9) .
Jog Press the JOG button or the search dial
so that the JOG button lights, then turn
the search dial. Playback is carried out
at a speed determined by the speed of
rotation of the search dial. The playback
speed range is –1 to +1 time normal
speed:
The search dial has no detents.
Variable speed Press the VAR button, turning it on, then
turn the search dial. You can control the
playback speed finely (47 steps) in the
range of ±1 times normal speed.
The search dial has detents at the still
position and at ±1 times normal speed.
Capstan Hold down the PLAY button and turn the
override (using search dial to adjust the playback speed
a tape) in the range of ±15%. Use this for phase
adjustment between this unit and an
external connected device.
Changing the setting of extended menu item 101
enables you to use the search dial alone to select
shuttle/jog/variable speed modes, without using the
SHUTTLE, JOG, and VAR buttons.