Sony DNW-A100 Operation Manual page 104

7-3 Extended Menu
Item number Item name
401
FUNCTION MODE
AFTER CUE-UP
403 AUTOMATIC PREROLL
REFERENCE ENTRY
404 CUEUP BY TC
405 CUEUP BY CTL
a) When controlled from an editor (BVE-2000/9100 etc.), selecting "REEL" allows high-speed cuing up.
7-14
Chapter 7 Menu System
Menu items in the 400s, relating to preroll
Settings
Select the state that the unit goes into after a cuing-up operation.
STOP : Stops (the "STOP mode").
STILL: Still playback (in search mode).
Note
When controlling this unit from an editor with the standard constants set, select
"STOP".
Select whether or not the edit IN point is automatically set by pressing the
PREROLL button, when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
Select the tape transport mode when cuing up to a time code value. This setting
is valid only when the CTL/TC/UB button on the lower control panel is set to TC
or UB.
CAP: During cuing up, the tape transport is in the "pinch ON" state (maximum
tape speed 10 times normal).
REEL : During cuing up, the tape transport is in the "pinch OFF" state. As the
tape approaches the cue up point and the tape speed drops, the tape transport
switches to the "pinch ON" state.
Note
Select "CAP" when the tape contains discontinuous time code, and the preroll will
span a discontinuity. (The tape is prerolled by extrapolating the time code signal
from the CTL signal before the discontinuity.)
Select the tape transport mode when cuing. This setting is valid only when the
CTL/TC/UB button on the lower control panel is set to CTL.
CAP: During cuing up, the tape transport is in the "pinch ON" state (maximum
tape speed 10 times normal).
REEL: During cuing up, the tape transport is in the "pinch OFF" state. As the
tape approaches the cue up point and the tape speed drops, the tape
transport switches to the "pinch ON" state.
To give priority to editing accuracy, select "CAP".
a)