Sony DNW-A100 Operation Manual page 116

7-4 Disk File Management Menu
7-4-2 Operations in the Disk File
Management Menu
To access the disk file management menu and change
a setting, use the following procedure.
1 Display the disk file management menu.
2 Select the item whose setting you wish to change.
3 Change the setting.
Displaying the disk file management menu
While the hard disk is playing back or stopped, press
the MENU button, then press the MASTER button.
The displays shown below appear in the time data
display and on a monitor connected to the
COMPOSITE VIDEO OUTPUT 3 (SUPER)
connector. (The following illustrations assume that F1
was selected last time the menu was accessed.)
Time data display
Monitor
DISK FILE MANAGEMENT
*F1:SELECT RECORD TYPE
F2:CONVERT TYPE(S<->F)
F3:SELECT GOP/FRAME
F4:DELETE PROGRAM
F5:DELETE ALL FILE
Selecting the item whose value you wish
to change
Turn the search dial to display the required item in the
time data display, then press the SET button.
7-26
Chapter 7 Menu System
Switching between full edit mode and
simple edit mode (F1)
Using the F1 item of the disk file management menu,
you can switch between full edit mode and simple edit
mode.
Full edit mode
When you select full edit mode, the FULL EDIT
indicator on the lower control panel lights.
In full edit mode, insert editing is possible for the
video and audio channels individually. For feed mode
playback of the program, the playback speed is
restricted to normal speed.
Simple edit mode
When you select simple edit mode, the SIMPLE EDIT
indicator on the lower control panel lights.
In simple edit mode, insert editing is not possible for
the video and audio channels individually. When item
F3 is set to GOP, the maximum playback speed of the
program in feed mode playback is twice normal speed.
To switch between full edit mode and simple edit
mode, use the following procedure.
(Taking switching from simple edit mode to full edit
mode as an example)
Note
Make this setting before carrying out any file creation.
If there are already any recorded files, it is not possible
to switch between full edit mode and simple edit
mode.