Operator's Seat; How To Raise The Cargo Bed; Raising And Lowering The Cargo Bed - Kubota RTV500 Operator's Manual

BOperator's Seat
To open the seat, raise the seat to the forward position.

(1) Operator's seat

A For the component below the seat, turn over the
rubber sheet to work on it as shown in the figure below.
(1) Rubber sheet (A) Seat

HOW TO RAISE THE CARGO BED

To avoid personal injury:
A When servicing under raised bed, make sure
safety support is properly mounted.
A Do not touch muffler or exhaust pipes while
they are hot; Severe burns could result.
BRaising and Lowering the Cargo Bed
To avoid personal injury;
A Make sure the vehicle is on a firm, level surface
and the parking brake is applied before raising
the cargo bed and securing the cargo bed in the
raised position.
A A loaded cargo bed can be very heavy. Never
raise the cargo bed when it is loaded. Unload
the cargo bed before raising it by hand.
1. Park the vehicle on a flat surface.
2. Empty the cargo bed by hand.
3. Release the latches on both sides and then raise the
cargo bed with the hand grip.
(1) Latch
(2) Hand grip
4. Push the safety support into the latch slot to lock when
the cargo is fully raised.
PERIODIC SERVICE
(A) "LOCK"
(B) "RELEASE"
(C) "RAISE"
39