Lan Ethernet Connection - Alcatel-Lucent Extended Communication Server Installation & Configuration Manual

connections menu. This opens the connection list.
2. If you are creating a new connection:
a. Click Add.
b. Select the WAN ADSL PPPoE option
c. Click OK.
Otherwise, if you are modifying an existing WAN ADSL PPPoE connection:
a. Select the WAN ADSL PPPoE connection in the list.
b. Click the modification button
3. In the displayed form, enter the connection name. You can give any name that clearly
identifies the connection.
4. The WAN connection can be dynamically configured by the ISP.
If it is not configured automatically:
a. Enter the PPPoE settings given by the ISP (connection identifier, connection password
and confirmation).
b. Select whether the DNS server addresses provided by the ISP should be used
(recommended).
5. Select the Ethernet interface (eth1/eth2 if available).
6. Activate the interface by selecting Yes.
7. Validate the settings by clicking OK.
4.3.3

LAN Ethernet Connection

Within the private area, network interfaces must have the LAN Ethernet connection type. In
figure below and considering the Internet access, the interface eth0 IP address is private while
the router IP address is public. The LAN1 interface is also a LAN Ethernet connection
To create or configure an Ethernet LAN connection:
.
Figure 4.5: Ethernet LAN Connections on eth0 and eth1
4-5