Alcatel-Lucent VitalQIP ESM 1200 Quick Start Manual

VitalQIP ESM 1200
Thank you for choosing the VitalQIP
If the box containing the VitalQIP Enterprise Server Module or the contents themselves are damaged,
please contact the Alcatel-Lucent Support center immediately. Refer to "Contacting technical support".
This guide is intended to help you set up the appliance and connect it to the network quickly. Refer to
the table below as you ensure that the contents of the box are accounted for.

Box contents

Your VitalQIP Enterprise Server Module ships with the following items:
Item
Enterprise Server Module
Quick Start Guide
Slide Rail Kit
Power cables
DB9-to-RJ45 Serial Connector
Prerequisites
You need to have the Appliance Management Software (AMS) running on an appliance or a standalone
server. The software can be downloaded from the Alcatel-Lucent download site (
). The AMS administrator needs to create a record for the ESM
lucent.com/support
provide the appliance setup information to you either in print format or electronically, as described on
the next page in Appliance setup instructions. Setup of an appliance in AMS is described in "View
appliance setup information" in Chapter 2 of the AMS User's Guide.
Figure 1. VitalQIP ESM 1200 front view
Figure 2. VitalQIP ESM 1200 rear view
®
®
Enterprise Server Module, ESM
1200
.
Quantity
1
1
1
2
1
www.alcatel-
1200
in AMS and