Introduction; Starting Up With A Direct Access - Alcatel-Lucent Extended Communication Server Installation & Configuration Manual

2
After reading this chapter, you will be able to start up the Extended Communication Server and
access the graphical administration interface.
2.1

Introduction

Two modes are provided for accessing the administration interface for the first time:
- A direct access, the server being equipped with a screen, a keyboard and a mouse
- From a local PC connected to the server
2.2

Starting Up with a Direct Access

To start up and access the Extended Communication Server administration interface with a
direct access
1. Unpack the server.
2. Connect the power cable.
3. Connect a screen, a keyboard and a mouse to the server.
The server has one VGA port for connecting the screen, and PS/2 ports or USB ports for
connecting a keyboard and a mouse.
4. Switch on the server.
Figure 2.1: Using a Direct Access or a Local PC
2-1