Loading The Site Into The Server; Loading By Ftp; Using Microsoft Network Neighborhood; Reverse Proxy Configuration - Alcatel-Lucent Extended Communication Server Installation & Configuration Manual

13. Change the Status of DNS server to Active.
12.3

Loading the Site into the Server

Two methods can be used to load the site into the server:
- FTP (webmaster only)
- Microsoft Network Neighborhood
12.3.1

Loading by FTP

The Webmaster can use any FTP utility.
The following parameters are required:
- The IP address. This address does not depend on the network interface used to access
the site. It depends on the FTP configuration you can find selecting the Service
management > Management of FTP service > FTP: standard server menu.
- The webmaster identifier and password.
- The destination, which is the /ftpgroups/<website_name>/html directory.
12.3.2

Using Microsoft Network Neighborhood

The webmaster has several ways for accessing the website location, such as the
\\<ECS_NetBIOS_name>\<website_name> address. You can find the NetBIOS name using
the Service management > Files server and domain controller > Global settings menu, in
the Configuration tab.
The webmaster then copies the website data to the html directory.
12.4

Reverse Proxy Configuration

The reverse proxy allows to expose internal web sites from your intranet to the outside world
through your Virtualdesk site.
The Reverse Proxy tab displays system reverse proxy mappings and allows to add user
mapping.
To add a user defined mapping:
- Navigate to Service management > Web > Advanced configuration
- Select the Reverse Proxy tab
12-7