Compatibility With Voip - Sip Service; Configuration 1 - Alcatel-Lucent Extended Communication Server Installation & Configuration Manual

In the Fax Service section:
- FaxServer Profile: select the fax user profile. This parameter defines the coversheet and
the language of faxes sent by the user.
The default profile is set to the profile associated to the user group if it exists. Otherwise
the default profile is set to the profile associated to the user language.
For this parameter, the choice includes all language profiles and new profiles created in
the Define a new porfile tab.
If you want to associate a specific coversheet to a user:
• In the Define a new profile tab, create a new profile with no associated group
• In the Add coversheets tab, upload the new coversheet created with the coversheet
editor
• In the Coversheets and profiles tab, associate the new coversheet to the new profile
• In the user settings, associate the new profile to the user
- Internal Fax Number: enter the internal phone number associate to the fax of the user.
- External Fax Number: enter the number on which the user will receive his faxes
11.3 Compatibility with VoIP – SIP Service
It is not possible to create simultaneously 2 SIP trunks with different properties between the
Alcatel-Lucent OmniPCX Office Communication Server and the Extended Communication
Server using the same IP address.
It is not possible to have fax server and VoIP SIP activated on the same Extended
Communication Server IP address.
Supported configurations:
11.3.1

Configuration 1

Figure 11.23: User Fax Number Definition
11-17