Removing The Cooktop, Burner Base, & Ignitor - KitchenAid KDRP487MSS Technical Education

REMOVING THE COOKTOP, BURNER BASE, & IGNITOR
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connections
and replace all parts and panels
before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the range.
2. Remove the grates from the range.
3. Remove the burner caps from the burner
heads.
Fire Hazard
4. To remove the cooktop:
a) Remove the two T-20 torx screws from
each of the burner heads and remove
the heads from the cooktop.
Burner Head
b) Remove the screws from the front and
rear corners of the cooktop.
Screws
c) Lift the rear of the cooktop and pull the
cooktop off the top of the unit.
4-2
Screws
Lift Rear Of Cooktop