Removing The Cooktop Glass - KitchenAid KESI901PBL Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug range or disconnect power.
2. Pull the range out of its mounting location
so that you can access the rear of the unit.
3. Remove the control panel and rotate it
forward (see page 4-2, steps 2a through
2d for the procedure).
4. Remove the screws from the left and right
side trim, and then from the rear trim.
Remove the trim pieces from around the
cooktop glass.
Side Trim
Screws

REMOVING THE COOKTOP GLASS

Rear Trim
Screws
5. Remove the cooktop glass brackets from
the left and right sides of the range.
Side Bracket Screws
6. Lift the rear of the cooktop glass off the
range, slide it out from under the front
control bracket, and remove it.
REASSEMBLY NOTE: When you reinstall the
cooktop glass, be sure to keep the edges of the
glass against the rear and side support tabs.
Glass Support Tabs
4-5
Side & Rear