d) Carefully unsnap the CANCEL and
ENTER pushbutton boards for both
ovens, and remove the coil springs. Be
careful not to break the fragile holder
tabs.
Board Tabs
e) Disconnect the two wires on each of the
two oven light switches.
Wire Connectors
f) Remove the control panel from the unit.
CANCEL
Pushbutton
ENTER
Pushbutton
Spring
Oven Light Switch
4-5
4.
To remove a spark module:
Spark Modules
Left
a) Remove the control panel from the unit
(see step 3 on page 4-4 for the proce-
dure).
b) Disconnect the wires from the spark
module terminals.
c) Remove the two hex-head screws from
the spark module and remove the mod-
ule.
Screw
Brown
Yellow
2 White-Blue
2 Red
2 Green
5.
To remove the (8) ignition switches:
Ignition Switches
a) Remove the control panel from the unit
(see step 3 on page 4-4 for the proce-
dure).
Continued on the next page.
Right
Spark Module
Yellow
Brown
Screw