Removing The Cooktop Bimetal & A Surface Burner/Ignitor - KitchenAid KGST300 Technical Education

REMOVING THE COOKTOP BIMETAL
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connec-
tions and replace all parts
and panels before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the range.
2. Remove the grates and burner caps.
Surface Burner Grate
3. Remove the two screws from each of the
burner heads and lift the heads off the
cooktop.
Burner Head
& 2 Screws
& A SURFACE BURNER / IGNITOR
Fire Hazard
Burner Cap
4. Remove the screws from the decorative
cover and remove the cover.
Decorative
Cover &
Screws
5. Remove the control panel from its sub-
chassis, (see page 4-2 for the proce-
dure), and rotate it forward onto the cooktop
glass.
6. Remove the five screws and the flat washer
from the control panel subchassis.
Screw & Flatwasher
Left & Right Subchassis Screws
4-8