KitchenAid KDRP487MSS Technical Education page 27

f) Pull the electronic control and trans-
former platform out of the unit, remove
the three hex-head screws from the
housing, and remove the housing and
electronic control assembly.
Electronic Control
Housing Screws
Electronic Control Connector & Pinouts
Double Line
Break Relay
P5
BL R Y
BK BK
JP18 JP19
20 21 22
GN BU BU
P3
P1 P8
BK OR GY OR Y Y BK
P4
P9
Thermostat & Selector Sw.
Connector
10. To remove the left or right cavity light
transformer or control power trans-
former
a) Remove the thermostat & selector
switch assembly (see step 8 on pages
4-7 and 4-8 for the procedure).
b) Remove the electronic control and
transformer platform from the unit (see
step 9 on page 4-8 for the procedure).
Cavity Light
Transformer
c) Disconnect the wire connectors from
the transformer you are servicing.
e) Remove the two hex-head screws from
the transformer and remove it from the
platform.
White Wires
BK
BK
OR
Y
Brown Wires
Screw (1 of 2)
4-9
Control Power
Transformer
BK BU
BU WH
Screw (1 of 2)