Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
BROIL ELEMENT
Refer to page 4-15 for the procedure for ser-
vicing a broil element.
1.
Turn off gas supply and disconnect power
to the range.
2.
Disconnect the wires from the broil ele-
ment terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to the broil
element terminals. The meter should indi-
cate 17 to 20 Ω.
WARNING
Electrical Shock Hazard
HIDDEN BAKE ELEMENT
Refer to page 4-23 for the procedure for ser-
vicing a hidden bake element.
1.
Turn off gas supply and disconnect power
to the range.
2.
Disconnect the wires from the hidden bake
element terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to the
hidden bake element terminals. The meter
should indicate 25 to 30 Ω.
5-6