KitchenAid KDRP487MSS Technical Education page 37

6. To remove a convection fan motor:
a) If not already done, remove the con-
vection cover and the convection bake
element from the rear of the oven liner
(see page 4-18 for the procedure).
b) Use a 10 mm (7/16") socket and re-
move the hex nut from the convection
fan. NOTE: The nut has a left-rotation
thread for removal.
c) Remove the three front convection fan
motor screws from the rear of the oven
liner.
d) Pull the range out of its mounting loca-
tion so that you can access the rear of
the unit.
e) Remove the rear panel from the range
(see page 4-17 for the procedure ).
Convection
Fan
10 mm
(7/16")
Hex Nut
Convection Fan Motor Mounting Screws
Convection
Fan Motor
Front Screw
(1 of 3)
4-19
f) Remove the two convection fan motor
mounting screws and remove the mo-
tor from the rear of the range.
Convection Fan Motor
BACK OF RANGE
Convection Fan Motor Terminals