KitchenAid KDRP487MSS Technical Education page 21

5. To remove a burner base and an igni-
tor:
a) Remove the gas line from the burner
base.
b) Disconnect the wire from the ignitor.
c) Remove the two hex-head screws from
the burner base bracket and position
the assembly so that you can access
the ignitor screw.
Ignitor Wire
Gas Line
Screw
Screw
4-3
d) Remove the screw from the ignitor and
remove the ignitor from the burner base.
e) Remove the two hex-head screws from
the burner base and remove the base
from the bracket.
Burner Base Screws
Ignitor Screw