KitchenAid KDRP487MSS Technical Education page 13

c) Unscrew the conversion cap from the
gas distribution valve and remove it and
the plastic cap. Note the difference be-
tween the L.P. and Natural gas ends of
the cap. NOTE: The valve you are ser-
vicing may not have a plastic cap.
Conversion Cap Set For Use
With (N) Natural Gas
L.P. Gas Natural Gas
2-3
d) Install the loop on the plastic cap over
the natural gas side of the conversion
cap.
e) Install the plastic cap and the conver-
sion cap on the gas distribution valve
with the L.P. side facing up (you will see
"LP" stamped inside the cap, as shown
below).
4. Reinstall the bottom trim.
5. Turn the gas supply valve handle on.
Gas Valve Handle
To "On" Position
Conversion Cap
Set For L.P. Gas
Plastic Cap