Removing A Broil Element - KitchenAid KDRP487MSS Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connections
and replace all parts and panels
before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the range.
2. Remove the racks from inside the oven.

REMOVING A BROIL ELEMENT

Fire Hazard
3. Remove the two front bracket screws and
two rear bracket screws from the broil
element.
4. Carefully pull the element forward so that
the terminal connectors are through the
oven liner holes, and disconnect the wires
from the terminals.
4-15
Front Bracket
Screws
Broil
Element
Rear Bracket Screws
Element Wires