Removing The Cooktop Glass - KitchenAid KESC300H WH Technical Education

REMOVING THE COOKTOP GLASS

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug range or disconnect power.
2. Pull the range out of its mounting location
so that you can access the side trim.
3. Remove the control panel from its
subchassis, (see page 4-2 for the proce-
dure), and set it on the subchassis.
4. Remove the two screws from the left and
right side trim. Do not remove the trim at
this time.
5. Raise the cooktop and prop it up (see
steps 3 and 4 on page 4-5 for the proce-
dure).
Right Side
Trim Screws
6. Loosen the left and right tension bracket
screws and remove the brackets from
behind the side trim.
7. Remove the wire clip from the left side
trim.
Left Tension
Bracket & Clip
Continued on the next page.
4-7
Right Tension
Bracket