GREAT PLANES RealFlight 7 User Manual page 30

For additional information on how to use the QuickSelect tabs, please refer to the
information contained in the section entitled
Some Common Tasks-
• The easiest method of resetting your aircraft to its original takeoff position is to
press the reset button located on the front of the InterLink controller.
Alternatively, you can reset the aircraft by pressing the space bar on the keyboard,
or by selecting the Reset Position menu item, which is located in the Aircraft
menu.
• If your aircraft is equipped with smoke, the two-position switch located on the
right side of your InterLink controller will generally be utilized to activate this
feature.
• To zoom in on an aircraft, press the [+] (plus) key on the number pad of the
keyboard. Alternatively, you may use menu commands to zoom in. To do so,
click on the View menu and then click on the Zoom In menu item. Each time
the [+] (plus) key or the Zoom In menu item are pressed or selected, the view will
increase incrementally.
• To zoom out of the current view, press the [–] (minus) key on the number pad of
the keyboard. Alternatively, you may use menu commands to zoom out. To do
on page 44.
QuickSelect-
26