GREAT PLANES RealFlight 7 User Manual page 26

When you are satisfied with your selection, click OK to return to the simulator using
the newly selected aircraft.
Complete information pertaining to the Select Aircraft... menu item is available in
Chapter 6 of this manual, The Aircraft Menu.
Alternatively, you may use the InterLink Elite controller to change aircraft selections.
(This feature is not available with the InterLink Plus controller.) Simply press the
Menu/Select button located on the front of the InterLink Elite controller. This will
bring forth the QuickSelect tabs on the left side of the computer screen and the aircraft
selection tab, represented as an airplane icon, should be the highlighted tab. Press the
Menu/Select button once again to bring up the QuickSelect Aircraft Selection dialog
box. Move the Data Lever, found on the lower right side of the InterLink Elite
controller, up or down to view the available aircraft. To select an aircraft, simply
highlight the name and press the Menu/Select button. You will return to the
simulation using the newly selected aircraft. Further instructions can be found on page
116.
If you wish to exit the Aircraft Selection screen without making any changes, simply
press the Reset button on the InterLink Elite.
Aircraft Most Recently Used List (MRU)-
If you have selected any different aircraft previously, you will note that these aircraft
appear on a list in the Aircraft menu; as shown below. This list is at the very bottom of
the menu. This list is commonly referred to as a Most Recently Used, or MRU list. It
is limited to the eight most recently used aircraft. If you wish to fly one of the aircraft
from this list, simply click on the name of the aircraft in the MRU list.
22