GREAT PLANES RealFlight 7 User Manual page 17

Follow the on-screen instructions to complete the setup procedure. Upon
completion of the installation, click OK.
Installing or Updating DirectX-
1. RealFlight will ask if you wish to install DirectX 9 on your PC. It is
important that your PC utilizes DirectX 9.0c or later. Click OK to
proceed to the DirectX License Agreement.
2. Click "I accept the license agreement" to install DirectX 9.0c.
Alternatively, if you do not wish to update DirectX at this time, click
Cancel.
3. If you have opted to accept the license agreement, click Next to
proceed with the installation. DirectX will install the necessary files to
update your PC.
4. When prompted, click Finish. Your PC will power down and then
restart once again.
Connect the InterLink Elite Controller or interface-
The InterLink Elite controller and the RealFlight interface use the USB
(Universal Serial Bus) port, so there is little to do in the way of setup.
1. With the software installation procedure complete, firmly plug into an
available USB port on the PC. You do not have to shut the PC down
to plug the controller in.
13