GREAT PLANES RealFlight 7 User Manual page 129

example, and Simple is selected, the parameter available to modify will
show only the maximum deflection. If, however, Advance is selected,
the maximum, minimum and center deflection parameters will be
visible for editing.
Units-
This option toggles the units of measure between metric and SAE
units. It is important to note that modifying this option affects all
measurements in the simulation. For example, changing from SAE to
metric in the editor also affects the airport editor dialogs.
To modify this option, click the Display Metric Units setting. Then
select the unit of measurements you would prefer from the drop-down
menu. The options are English or Metric. A check mark will appear
next to the unit that is currently displayed.
Reload Color Scheme-
This option allows you to view the results of an edited trim scheme.
There are two ways that you can do so. The first is to use the Select
Color Scheme menu, which is found within the Aircraft menu.
Simply click on the color scheme that you have just edited, and
RealFlight will reload the color scheme onto your aircraft and reset the
aircraft back on the runway.
Alternatively, within the aircraft editor, click on the Options menu
item. Select Reload Color Scheme. Clicking this reloads the color
scheme, showing any changes you have made to the aircraft. To
improve visibility of the trim scheme, you may wish to remove the
wireframe from the preview. To do so, please follow the procedure
noted in the description for "Show Wireframe."
View Menu-
The View menu in the aircraft editor offers choices on the perspectives of the
aircraft in the preview window.
125