Safety Alerts - GREAT PLANES RealFlight 7 User Manual

Slowdown Duration (sec)-
Before the Rewind feature kicks in fully, your flight will slow to a stop, then
proceed in reverse. The Slowdown Duration setting allows you to adjust how
long this process takes.
Time to Reach Maximum Reverse Speed (sec)-
This setting allows you to adjust the amount of time it takes before the Rewind
feature is functioning at full speed.

Safety Alerts -

When you are at the flying field, it is important to make sure your radio switches, dials
and throttle are all set appropriately before you start your aircraft. RealFlight 7 helps to
remind you of this when you reset your flight.
Helicopter Resets-
When you reset your helicopter, a small window will appear warning you if the
throttle or switches are in a position which could damage the helicopter. For
example, you would not want the helicopter to be reset with the throttle stick
in the full throttle position. To disable this feature, change this setting to No.
Wind -
The wind and weather options control the atmospheric conditions encountered in the
simulation. You can adjust these to match the conditions typically found at your local
flying site.
110