GREAT PLANES RealFlight 7 User Manual page 136

Clicking on the parameter will allow you to view a description of its use in the
Description pane directly below the Parameter window. This will also allow you to
modify the currently selected parameter.
Adding and Removing Components-
There are times when you may want to add a new component to the aircraft. The first
step is to determine the location for the new part. For example, if you were to add
flaps, it makes more sense to add them to the main wing, than to the fuselage.
After determining a location for the new part, you can add it in one of two ways.
Select the new part from the Edit menu then right-click on the component to which
you are adding the new part. Again, if you were adding flaps, right-click on the Main
Wing component, then select Add Control Surface.
Removing a component works in much the same way. In the Aircraft Parts Tree,
select the component you wish to remove and then select Delete Component from
the Edit menu. You can also accomplish the same thing by right-clicking on the part
to remove and selecting Delete Component.
132