Dust Seal And Bearing Replacement - Suzuki RM-Z450 Owner's Service Manual

WHEEL BEARING
• Turn the inner race by finger and inspect it for smooth move-
ment.
• Inspect for bearing damage.
• If any defects are found, replace the bearing with a new one.

DUST SEAL AND BEARING REPLACEMENT

• Remove the dust seals with the special tool.
" 09913-50121: Oil seal remover
• Remove the bearing with the special tool.
• Remove the spacer 1 and bearing with the special tool.
" 09921-20240: Bearing remover set (Remover 20 mm)
FRONT AND REAR WHEELS 15-5