16-18
FRONT AND REAR BRAKES
• Remove the master cylinder rod pin 4.
• Remove the brake pedal pivot bolt 5 and return spring 6.
INSTALLATION
• Apply SUZUKI SUPER GREASE to the oil seal and brake
pedal pivot bolt.
) 99000-25010: SUZUKI SUPER GREASE "A"
• Install the return spring 1 properly. (%19-23)
• Tighten the brake pedal pivot bolt 2 to the specified torque.
$ Brake pedal pivot bolt: 29 N·m (2.9 kgf-m, 21.0 lb-ft)
• Install the master cylinder rod pin 3, washer and new cotter
pin 4.
• Install the clip 5.
• Adjust the brake pedal height. (%2-32)
or equivalent