Brake Lever; Removal; Installation; Brake Pedal - Suzuki RM-Z450 Owner's Service Manual

BRAKE LEVER

REMOVAL

• Remove the boot 1.
• Remove the bolt/nut and brake lever 2.
• Remove the brake lever adjuster return spring 3.
( 09930-11950: Torx wrench, T25

INSTALLATION

Install the brake lever in the reverse order of removal. Pay atten-
tion to the following points:
• Apply grease to the brake lever adjuster return spring, pivot
bolt and contact point between piston and brake lever.
) 99000-25010: SUZUKI SUPER GREASE "A"
• Tighten the pivot bolt and nut to the specified torque.
$ Brake lever pivot nut: 6 N·m (0.6 kgf-m, 4.4 lb-ft)
Brake lever pivot bolt: 6 N·m (0.6 kgf-m, 4.4 lb-ft)

BRAKE PEDAL

REMOVAL
• Remove the clip 1.
• Remove the cotter pin 2 and washer 3.
or equivalent
FRONT AND REAR BRAKES 16-17