2-18
PERIODIC MAINTENANCE
HOT STARTER
Adjust the hot starter cable play as follows:
• Loosen the lock-nut 1.
• Turn adjuster 2 so the hot starter lever clearance A mea-
sured at the lever holder obtains 2 – 3 mm (0.08 – 0.12 in)
when squeezing the lever until pressure is felt.
• Tighten the lock-nut 1.
# Hot start cable play A: 2 – 3 mm (0.08 – 0.12 in)
• Check that the hot starter lever moves smoothly from full open
to full close.
• If it does not move smoothly, lubricate the hot start cable.