7-6
CLUTCH
PUSH ROD
• Inspect the push rod for wear and damage.
• If any defects are found, replace the push rod with a new one.
RELEASE BEARING
• Inspect the release bearing for play, discoloration, wear and
seizure.
• Move the inner race by finger and inspect for smooth move-
ment.
• If it does not smoothly, replace the bearing with a new one.
RELEASE BEARING REPLACEMENT
• Remove the release bearing with the special tools.
" 09913-70210: Bearing remover/installer set
Bearing: $ 25 attachment
• Press the bearings with the special tools.
" 09913-70210: Bearing remover/installer set
Bearing: $ 32 attachment