Optional Double Door Installation; Decorative Door Grill Installation; Tile Inset Installation - HAMPTON BAY HG35-NG1 Owners & Installation

Direct vent gas fireplace
Table of Contents

Advertisement

INSTALLATION
OPTIONAL DOUBLE
DOOR INSTALLATION
1) Secure the Top Door Clip into the Top Front
Casting.
Top Door Clip
2) Pull all four door hinges out from the sides
of the Front Casting.
3) Fasten the Right Door to the 2 right hinges
(2 screws per hinge).
Repeat for the Left Door.
26
DECORATIVE DOOR
GRILL INSTALLATION
1) Hook the Top Clip on the Decorative Door
Grill into the top lip of the Front Casting.
2) Lift the Decorative Door Grill slightly and
drop the Bottom Clips into the bottom lip of
the Front Casting.
Top Clip
Rear View of
Decorative Door Grill
Bottom Clip
Bottom Clip
TILE INSET
INSTALLATION
Side Tile Inset
1) Slide the Standard Side Tile Inset out to-
wards the back of the unit.
2) Slide the Optional Side Tile Inset into the
side panel, over the spring clip.
3) Repeat for other side.
Top Tile Inset
1) Lift the Cast Top off the unit.
2) Place the Cast Top face down on a soft
surface. Take care not to scratch the fi nish
on the Top.
3) Remove the Tile Clips holding the Standard
Tile Insets in place.
Tile Clip
Tile Clip
4) Place the Optional Tile Insets into position
and secure with a top and bottom Tile Clip.
5) Replace the Cast Top on the unit.
Hampton HG35-1 Direct Vent Freestanding Gas Stove
Tile Clip

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg35-lpg1

Table of Contents