D-Link DES-1210-08P Reference Manual page 77

4 Configuration
DES-1210 Series Switch Web UI Reference Guide
Source Port: Specify the source port.
Source Port Mask: Defines the range of source IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Destination Port: Specify the destination port.
Destination Port Mask: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 0 – 15, set mask of FFF0.
Click Next button then the ACL profile is added.
To define the IPv6 ACL UDP profile: Select IPv6 ACL with UDP of Protocol Type and click Next button.
The updates to show the follows:
Figure 4.105 - Add Access Rule – IPv6 UDP
Source Port: Specify the source port.
Source Port Mask: Defines the range of source IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Destination Port: Specify the destination port.
Destination Port Mask: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 0 – 15, set mask of FFF0.
Click Next button then the ACL profile is added.
2) Selecting the field of interest will display the next page which shows the follows:
72