L2 Functions > Lldp > Lldp Management Address Table; L2 Functions > Lldp > Lldp Local Port Table; L2 Functions > Lldp > Lldp Remote Port Table - D-Link DES-1210-08P Reference Manual

4 Configuration
Address: Specify the address.
Port State: Specify whether the Port State is enabled n the port. The possible field values are:
Enabled – Enables the port state configured on the port.
Disabled – Disables the port state configured on the port.
Click Apply to implement changes made.
L2 Functions > LLDP > LLDP Management Address Table
The LLDP Management Address Table page displays the detailed management address information for the
entry.
Management Address: Specifies IPv4 or MAC address then enter the address. Click Search and the table
will update and display the values required.
Subtype: Displays the managed address subtype. For example, MAC or IPv4.
Management Address: Displays the IP address.
IF Type: Displays the IF Type.
OID: Displays the SNMP OID.
Advertising Ports: Displays the advertising ports.
L2 Functions > LLDP > LLDP Local Port Table
The LLDP Local Port Table page displays LLDP local port information.
Port : Displays the port number.
Port ID Subtype: Displays the port ID subtype.
Port ID: Displays the port ID (Unit number/Port number).
Port Description: Displays the port description.
Click View Normal or Detailed to displays more information.
L2 Functions > LLDP > LLDP Remote Port Table
This LLDP Remote Port Table page is used to display the LLDP Remote Port Brief Table. Select port
number and click Search to display additional information.
Figure 4.66 – L2 Functions > LLDP > LLDP Management Address Table
Figure 4.67 – L2 Functions > LLDP > LLDP Local Port Table
DES-1210 Series Switch Web UI Reference Guide
5 1
5 1