Snmp > Snmp > Snmp Host; Snmp > Snmp > Snmp Engine Id; Snmp > Rmon > Rmon Global Settings; Snmp > Rmon > Rmon Statistics - D-Link DES-1210-08P Reference Manual

4 Configuration
SNMP > SNMP > SNMP Host
This page is to configure the SNMP trap recipients.
Host IP Address: Select IPv4 or IPv6 and specify the IP address of SNMP management host.
SNMP Version: Specify the SNMP version to be used to the management host.
Community String/SNMPv3 User Name: Specify the community string or SNMPv3 user name for the
management host.
Click Apply to create a new SNMP host, Delete to remove an existing host.
SNMP > SNMP > SNMP Engine ID
The Engine ID is a unique identifier used to identify the SNMPv3 engine on the Switch.
Input the Engine ID then click Apply to apply the changes and click Default resets to default value.
SNMP > RMON > RMON Global Settings
Users can enable and disable remote monitoring (RMON) status for the SNMP function on the Switch. In
addition, RMON Rising and Falling Alarm Traps can be enabled and disabled. Click Apply to make effects.
SNMP > RMON > RMON Statistics
The RMON Statistics Configuration page displays the information of RMON Ethernet Statistics and allows
the user to configure the settings.
The RMON Ethernet Statistics Configuration contains the following fields:
Figure 4.120 – SNMP > SNMP > SNMP Host
Figure 4.121 – SNMP > SNMP > SNMP Engine ID
Figure 4.122 – SNMP > RMON > RMON Global Settings
Figure 4.123 – SNMP > RMON > RMON Statistics
80
DES-1210 Series Switch Web UI Reference Guide