Reboot Device; Configuration Backup & Restore; Firmware Backup And Upgrade - D-Link DES-1210-08P Reference Manual

4 Configuration

Reboot Device

Provide a safe way to reboot the system. Click Apply to restart the switch.
Configuration Backup & Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from the file. Two methods can be selected: HTTP or TFTP.
HTTP: Backup or restore the configuration file to or from your local drive.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
TFTP: TFTP (Trivial File Transfer Protocol) is a file transfer protocol that allows you to transfer files to a
remote TFTP server. Select IPv4 or IPv6 and specify TFTP Server IP Address and File Name for the
configuration file you want to save to / restore from.
Click Backup to save the current settings to the TFTP server.
Click Restore after selecting the backup settings file you want to restore.

Firmware Backup and Upgrade

Allow for the firmware to be saved, or for an existing firmware file to be uploaded to the Switch. Two methods
can be selected: HTTP or TFTP.
Figure 4.12 – Tool Menu > Reboot Device
Figure 4.13 – Tool Menu > Configuration Backup and Restore
Note: Switch will reboot after restore and
all current configurations will be lost
DES-1210 Series Switch Web UI Reference Guide
1 9
1 9