Monitoring > System Log - D-Link DES-1210-08P Reference Manual

4 Configuration
Cable Length (meter): If the test result shows OK, then cable length will be indicated for the total length of
the cable. The cable lengths are categorized into four types: <50 meters, 50~80 meters, 80~100 meters and
>100 meters.
Monitoring > System Log
The System Log page provides information about system logs, including information when the device was
booted, how the ports are operating, when users logged in, when sessions timed out, as well as other
system information.
ID: Displays an incremented counter of the System Log entry. The Maximum entries are 500.
Time: Displays the time in days, hours, and minutes the log was entered.
Log Description: Displays a description event recorded.
Severity: Displays a severity level of the event recorded.
Click Refresh to renew the page, and click Clear to clean out all log entries.
NOTE: Cable length detection is effective on
Gigabit ports only.
NOTE: If the port state of DES-1210-08P just
changed from link up to link down, please wait 5
seconds to execute the cable diagnostic test or
the test result might be incorrect.
Figure 4.130 – Monitoring > System Log
84
DES-1210 Series Switch Web UI Reference Guide