Snmp Settings - D-Link DES-1210-08P Reference Manual

4 Configuration

SNMP Settings

The SNMP Setting allows you to quickly enable/disable the SNMP function. The default SNMP Setting is
Disabled. Click Enabled and then click Apply to make it effective.
Figure 4.2 – Password setting in Smart Wizard
4.3 – SNMP Setting in Smart Wizard
NOTE: Changing the system IP address will
disconnect you from the current connection.
Please enter the correct IP address in the Web
browser again and make sure your PC is in the
same subnet with the switch. See Login Web-
based Management for a detailed description.
16
DES-1210 Series Switch Web UI Reference Guide