Appendix Bdriver Installation - SOLTEK SL-65F+ User Manual And Technical Manual

APPENDIX B
If you are using Windows 98 SE, you do not need to install the 4-in-1
driver as the IRQ Routing Driver and the ACPI Registry are already incorpo-
rated into the operating system. Users with Windows 98 SE may update the
IDE Busmaster and AGP drivers by installing them individually.
PART 1:
1. Put the CD into your CD-ROM.
2. There appears a welcome window.
(If doesn't, it means that your CD-ROM auto-run function does not enable, but
you still can browser the CD via Windows Explorer and change the directory to
where your CD-ROM directory is. Then run the autorun.exe)
3. Select "Install Driver".
4. Select "Install VIA Chipsets Driver".
5. Select "Install 4in1 Driver".
6. Then the program will automatically setup all drivers your system needs.
7. Finally, the system will re-boot.
NOTE: AFTER INSTALLED " 4in1 Driver", USER DOESN'T NEED TO INSTALL ANY
OTHER PROGRAM IN PART 2.
PART 2:
CAUTION!! ALL THE VIA MAINBOARD MUST INSTALL FOLLOWING 3 DRIVERS!!!
VIA Patch Code Installation
Windows95/Windows98:
1. Go to the CD-ROM disk, we suggest the CD-ROM title is D:\.
2. Find and run D:\Patch\Via\patch9x\Setup\Setup.exe
3. Select "Install VIA Chipset Functions' Registry", then it will automatically
install this program.
Note! This program should be installed before any other VIA's drivers.
VIA AGP VxD Driver for Windows 9x Installation
Windows95/Windows98:
1. Go to the CD-ROM disk, we suggest the CD-ROM title is D:\.
2. Find and run D:\Driver\Via\Agp\Setup\Setup.exe
3. Select "Install VIA AGP VxD in turbo mode" or "Install VIA AGP VxD normal
mode", then it will automatically install this program.
DRIVER INSTALLATION
Appendix B
37