Ide Hdd Auto Detection; Save & Exit Setup; Exit Without Saving - SOLTEK SL-65F+ User Manual And Technical Manual

IDE HDD AUTO DETECTION

IDE HDD Auto Detection detects the parameters of an IDE Hard Disk drive and
automatically enters them to the Standard CMOS Setup screen.
The screen will ask you to select a specific Hard Disk for Primary Master
after you selected this option. If you accept a Hard Disk detected by the
BIOS, you can enter "Y" to confirm and then press <Enter> to check next
Hard Disk. This function allows you to check four Hard Disks and you
may press the <ESC> after the <Enter> to skip this function and go back
to the Main Menu.
SAVE & EXIT SETUP
Save & Exit Setup allows you to save all modifications you have specified into
the CMOS memory. Highlight this option on the Main Menu and the following
message appears:
Press <Enter> key to save the configuration changes.

EXIT WITHOUT SAVING

Exit Without Saving allows you to exit the Setup utility without saving the modi-
fications that you have specified. Highlight this option on the Main Menu and
following message appears:
You may change the prompt to "Y" and press the <Enter> key to leave this
option.
SAVE to CMOS and EXIT (Y/N)? Y
Quit Without Saving (Y/N)? N
65F+ BIOS
35