SOLTEK SL-65F+ User Manual And Technical Manual page 24

65F+ BIOS
ACPI Function
Power Management
PM Control By APM
Video Off Method
Video Off After
Modem Use IRQ
Doze Mode
Standby Mode /
Suspend Mode
HDD Power Down
Throttle Duty Cycle
24
Enabled: Turn on ACPI function.
Disabled (default): Turn off ACPI function.
Choose Max. Saving, User Define (default), Disabled, or Min.
Saving.
Choose Yes (default) or No. You need to choose Yes when
the operating system has the APM functions, otherwise
choose No.
Choose Blank, DPMS or V/H Sync+Blank (default). You can
choose either DPMS or V/H Sync+Blank when ther monitor
has the Green function. You need to choose Blank when the
monitor has neither the Green function.
Choose NA, Suspend, Standby (default) or Doze.
Assign the IRQ number to the modem which is being used so
that the ring signal can wake up the system. The default set-
ting is 3 (COM2).
This mode sets the CPU speed down to 33MHz.
These two options allow you to choose the mode for the dif-
ferent timer. The Standby mode turns off the VGA monitor,
and the Suspend mode turns off the CPU and saves the en-
ergy of the system.
Time is adjustable from 1 to 15 minutes. When the set time
has elapsed, the BIOS sends a command to the HDD to power
down which turns off the motor.
Choose the duty cycle time: 12.5%, 25%, 37.5%, 50%, 62.
5% (default) or 75%. The bigger percentage, the more power
saving.