SOLTEK SL-65F+ User Manual And Technical Manual page 31

Primary
Master/Slave PIO
Secondary
Master/Slave PIO
Primary Master/Slave
Secondary Master/Slave
OnChip Primary/
Secondary PCI IDE
USB Keyboard Support
Init Display First
KBC input clock
Onboard FDC
Controller
Onboard Serial Port1
Onboard Serial Port2
Choose Auto (default) or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose Auto. You
need to set to a lower mode than Auto when your hard disk
becomes unstable.
Enabled (default): Turn on the onboard IDE function.
Disabled: Turn off the onboard IDE function.
UDMA
UDMA
Enabled (default): Turn on the onboard IDE function.
Disabled: Turn off the onboard IDE function.
Enabled: Enables this function when USB keyboard is being
Disabled (default): Disableds this function when USB key-
Choose PCI Slot(default), AGP.
Choose 6MHz, 8MHz(default), 12MHz or 16MHz.
Choose Enabled (default) or Disabled. Choose Disabled when
you use an ISA card with FDD function, or choose Enabled to
use the onboard FDD connector.
Choose Auto (default), 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3 or Disabled. Don't set port 1 & 2 to the same value,
except when setting at Disabled.
Choose Auto (default), 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3 or Disabled.
used.
board is not being used.
65F+ BIOS
31