SOLTEK SL-65F+ User Manual And Technical Manual page 17

Boot Up Floppy Seek
Boot Up NumLock
Gate A20 Option
Typematic Rate Setting
Typematic Rate
(Char / Sec)
Typematic Delay (Msec)
Security Option
Assign IRQ For VGA
PCI / VGA Palette
Enabled (default): During POST, BIOS checks the track num-
Disabled: During POST, BIOS will not check the track num-
On (default): Activate the NumLock function at boot up.
Off: Close the NumLock function at boot up.
Status
Choose Normal or Fast (default): This option allows the RAM
to access the memory above 1MB by using the fast gate A20
line.
Choose Enabled or Disabled (default): Enable this option to
adjust the deystroke repeat rate.
Range between 6 (default) and 30 characters per second.
This option controls the speed of repeating keystrokes.
Choose 250 (default), 500, 750 and 1000. This option sets
the time interval for displaying the first and the second
characters.
Choose System or Setup (default). This option prevents un-
authorized system boot up or use of BIOS Setup.
Choose Enabled (default) or Disabled.
Enabled: Assign one IRQ to VGA controller.
Disabled: Remove IRQ from VGA controller. The system will
Choose Enabled or Disabled (default). It determines whether
Snoop
or not the MPEG ISA cards can work with PCI / AGP.
ber for Floppy Disk drive to see whether it's 40 or
80 tracks.
ber for Floppy Disk drive.
have extra IRQ for other devices but the VGA con-
troller will still work (only IRQ will be removed).
65F+ BIOS
17